Syscom DS8116HCIST Manuel d'utilisateur

DS-8100-ST Series DVR USER MANUAL

9 5/0123.&(67.2/68&Compression z PAL/NTSC adaptive video inputs. z H.264 video compression with high reliability and superior definiti

99 5. Trading Information Settings, shown as Figure 3: Set the main type, with Card No., Trade Action, Trade Amount and Serial No. selectable. Set

100 Figure 5. Length Menu Note: No Length can be set if the main type is selected to Trade Action. 8. Set the Overlay Position of the main typ

101 Figure 7. Trigger Channel Menu Note: If no InCard and OutCard commands are provided by the Trade Action type, please enable the time delay f

102 Serial Interception The Serial Interception is used for capturing the card No. and other information by intercepting the data from serial port c

103 11. Set the Overlay Position of the main type. This menu is used for setting the overlay position of the card No., with the X/Y coordinate conf

104 Network Protocol The Network Protocol is used for receiving the card No. and other information by adopting Server or Client mode to set up TCP c

105 Network Protocol The Serial Protocol is used for receiving the card No. and other information by directly receiving the data sent from the seria

106 C H A P T E R 1 3 DVR Management

107 Configuring System Settings )0-B4<2/4-<&F6-6/7:&+6..4-<8&General settings such as the system language can be configured in

108 Figure 2. More Settings Menu 3. Configure the following settings: • Device Name: Name of the DVR used. • Device No.: Device number of D

10 z Management and maintenance for backup devices. Alarm & Exception z Configurable arming time for alarm in/out. z Various alarm types s

109 2. Configure RS-232 Settings. 3. The RS-232 port can be used in two ways: • Parameter Control: Connect a PC to the DVR using the PC serial po

110 Figure 5. Add User Menu 2. Enter information for new user, including User Name, Password, Level and User’s MAC. 3. The Level is the user l

111 Figure 7. Network Permission Settings Menu • Remote Log Search: Remotely view logs that are saved on the DVR. • Remote Configuration: Remote

112 9. Click the OK button to save and exit menu. Note: If you forget the password to your DVR, contact your supplier with the serial number of yo

113 Managing System ,=90/.4-<&Q&%P90/.4-<&)0-B4<2/7.40-&Configuration information from your DVR can be exported to a USB de

114 Figure 11. Firmware Update Menu 3. Select the Local Upgrade tab. 4. Select the firmware on the USB device. 5. Select Upgrade to begin the

115 Restoring Default Settings To restore default factory settings to your DVR: 1. Click Menu > Maintenance > Default to enter the Default S

116 2. Select OK to exit to the previous screen. Viewing System Log Many events of your DVR are logged into the system log. To access the system lo

117 will be named according to the time it was exported (e.g., 20100911143958logBack.txt). Figure 17. Log Search Export Menu 7. Click Cancel t

118 C H A P T E R 1 4 "996-14P&

11 5/0123.&"99:437.40-&;47</7=& Figure 3. Product Application Diagram (DS-8100HCI-ST DVR) Figure 4. Product Application Diagr

119 Glossary • Dual Stream: Dual stream is a technology used to record high resolution video locally while transmitting a lower resolution stream ov

120 FAQ • Why does my DVR make a beeping sound after booting? There are a few reasons for the warning beep your DVR makes after booting. 1. There is

12 Operating Your DVR There are numerous ways to navigate and operate your DVR. You may use the Front Panel Controls, the included IR (Infrared) Rem

13 • A/FOCUS+ Button: The A/FOCUS+ button is used to adjust focus in the PTZ Control menu. It is also used to switch between input methods (upper a

14 Figure 6. DS-8100AH(F)LI-ST DVR Front Panel The controls on the front panel include: 1. LCD: Display local menu and preview. Note:&

15 Manual Record interface. • 8TUV/PTZ: The 8TUV/PTZ button works as numeric [8] and letter [TUV]. It is also used to enter the PTZ Control mode. •

16 Figure 7. IR Remote Control The keys on the remote control closely resemble the ones found on the front panel. Referring to Figure 5, they inc

17 >84-<&.?6&>+#&A0286&A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this DVR. To use a USB

18 Rear Panel Figure 10. DS-8104HCI-ST Rear Panel No. Item Description 1 VIDEO IN BNC connectors for analog video input. AUDIO IN BNC

1 Hikvision® Network Digital Video Recorder User’s Manual This manual, as well as the software described in it, is furnished under lic

19 Figure 11. DS-8108/8116HCI-ST Rear Panel Note: DS-8108HCI-ST provides 8 video inputs and 8 audio inputs on rear panel. No. Item Descrip

20 Figure 12. DS-8100AH (F) (L) I-ST DVR Rear Panel No. Item Description 1 VIDEO IN BNC connectors for analog video input. 2 AUDIO IN BNC con

21 C H A P T E R 2 F6..4-<&+.7/.61

22 Starting and Shutting Down Your DVR Proper startup and shutdown procedures are crucial to expand the life of your DVR. To start your DVR: 1.

23 Note: If the checkbox is changed to , then the Setup Wizard dialog box will not appear next time until the factory default settings are resumed;

24 Figure 4. General Settings 6. Click the Enter button to enter the General Settings interface. 7. Select the language, output standard,

25 12. To access HDD management interface, click the Enter button. 13. If a new HDD has been recently installed, select the HDD from the list to

26 Figure 9. Edit Schedule Settings 20. Click the OK button. This will take you back to the Schedule tab. To copy the schedule to a different c

27 3. Click the General icon. You will be taken to the General Settings window, shown in Figure 11. Figure 11. General Settings 4. Enter th

28 C H A P T E R 3 $4G6&5/6G46H&

2 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable

29 Live Preview On-screen Display The Live Preview mode is automatically started after the DVR boots up. It is also at the very top of the menu

30 A0286&'96/7.40-&4-&$4G6&5/6G46H& &Some functions of the Live Preview can be quickly accessed by clicking the right-b

31 Configuring Live Preview Display Click Menu >Settings >Display to access the Live Preview display settings: Figure 4. Display Setting

32 +6..4-<&)7=6/7&'/16/& &The Camera Order settings allow you to set camera sequence in selectable live view display mode. S

33 C H A P T E R 4 @630/1&+6..4-<8&&&

34 Configuring Record Settings There are multiple ways to set up your DVR for recording, including setting up a recording schedule, triggering a r

35 Figure 2. More Record Settings • Pre-Record: Set the time in seconds to pre-record before the actual recording begins. • Post-Record: Set t

36 +3?612:4-<&7&@630/14-<& &The Schedule allows you to set up flexible recording schedules for daily or weekly recording. To

37 Figure 5. Manual Record Menu 2. Start manual recording by selecting ON or OFF for each camera. Protecting Recorded Files Two method

38 displayed. 4. Select the file you want to lock/unlock. 5. Click the Lock button to lock file. If the file is already locked, click the Unlock

3 Preventive and Cautionary Tips Before connecting and operating your DVR, please be advised of the following tips: • Ensure unit is installed in a

39 Figure 9. HDD Property Settings Menu 5. Set HDD Status to Read-only and then click OK to finish the setting. Note: 1. Once set to read

40 Figure 10. HDD Management Menu 4. Click the Set button. This will take you to the HDD Settings menu. 5. Set HDD Status to Redundancy, shown

41 Figure 12. Additional Record Settings 11. Set Redundantly Record to Yes. 12. Click the OK button to save settings. 13. Repeat steps 8-12 fo

42 C H A P T E R 5 5:7DE73K&

43 Video Playback The Client application allows all users to play back record files of the specified period. Multi-camera simultaneous playback is

44 2. Set the search parameters by selecting cameras to search, video/file type and the start/end time (as shown in Figure 3). Figure 3. Video Se

45 Figure 5. Video Event Search Menu 3. Click the Search button to start bring up the list of search results. After search results are pres

46 5:7DE73K&ED&)7/1&*2=E6/& &Note:&The playback by card No. is supported by DS-8100AH (F) (L) I-ST model only. To play ba

47 5:7DE73K&ED&5/6G46H&A016& & &The Client application also allows you to play back record files in Live Preview mode.

48 Figure 11. Log Search Menu 2. Set Major Type to Information; set Minor Type to Start Record or End Record; and then select the Start Time

4 !"#$%&'(&)'*!%*!+&C H A P T E R 1 ...

49 Figure 12. Digital Zoom in Playback Mode

50 C H A P T E R 6 #73K29&

51 Backing up Recorded Files Recorded files can be backed up to various devices, such as USB flash drives, USB HDDs or a DVD writer. %P90/.4-<&

52 Figure 3. Export Menu 6. Select device to which the record file is exported from drop-down list (USB Flash Drive, USB HDD, DVD Writer).

53 Figure 5. Successful Export Note: Video Player software will automatically be copied on to the device that the recorded files were export

54 Figure 7. Event Search Results 3. Select the files to export, you may also click the Play icon to verify that these files are indeed the one

55 4. Repeat for additional clips. 5. Press the ESC button to exit from the Playback interface. You’ll then be prompted to save the clips, a

56 4. Select a partition in the drop-down list, then you may click Start to start exporting. Wait until the backup process complete. A7-7<4-&

57 C H A P T E R 7 ":7/=&+6..4-<8

58 &Configuring Alarms A0.40-&;6.63.40-&":7/=& &Operate the following steps to configure Motion Detection Recording:

5 Configuring Alarms ...

59 motion detection. The maximum area can be set to be full screen. You can left click mouse, hold and drag it to mask the Motion Detection area. Us

60 Figure 5. Triggered Camera Settings 9. Select cameras to trigger for recording when motion is detected by checking the checkboxes under the d

61 Figure7. Exception Handle Menu 12. Click OK to complete motion settings for the selected camera. You may now add a schedule to start recor

62 Figure 9. Alarm Management Settings 3. Set the alarm input type to be Normally Opened (N.O) or Normally Closed (N.C). 4. Check the checkbox

63 Figure 11. Alarm Output Interface Note:&2 alarm outputs are provided for DS-8104HCI-ST model. 2. Select the output you would like to co

64 Figure 13. Manual Alarm Menu 2. Configure the following settings in the Manual Alarm menu: • Trigger: Select an alarm from the list and

65 Figure 15. Camera Settings Menu 5. Click the Handle button to enter the Exception Handle menu, shown in Figure 16. 6. Select the Schedule t

66 Figure 17. Exception Handle Menu 8. Click OK to finish the settings. 9. Repeat above steps to configure settings for other channels. O4160&

67 Figure 19. Camera Settings Menu Note: The DS-8100AHF (L) I-ST model supports the area settings for tamper detection. Please refer to the motio

68 8. Click OK to finish the settings. 9. Repeat above steps to configure settings for other channels. Exception Settings The exception setting

6 Updating System Firmware...

69 Configure Remote Alarm Host). • Trigger Alarm Output: Trigger an alarm output when exception is detected. Alarm output can be configured by fol

70 C H A P T E R 8 *6.H0/K&+6.. 4-<8&

71 Configuring Network Settings Network settings must be configured if DVR is used for monitoring over network. F6-6/7:&+6..4-<8&To confi

72 • Default Gateway: IP address of your Gateway. Typically the IP address of your router. • Preferred/Alternate DNS Server: The preferred and alter

73 Figure 5. PPPoE Settings 5. Check the PPPOE checkbox to enable this feature. 6. Enter User Name, Password, and Confirm Password for PPPOE a

74 5. Select DDNS Type. Three different DDNS types are selectable: IpServer, PeanutHull and DynDNS. • IpServer: Enter Server Address for IpServer

75 • NTP Server: Address of NTP server. Note:&The address can be set to the IP address or the Domain name. When the Domain name is used, pleas

76 4. Set Multicast IP, as shown in Figure 10. When adding a device to the Network Video Surveillance software, the multicast address must be the s

77 %N=74:&+6..4-<8&To configure E-mail settings: 1. Enter the Network Settings menu by clicking Menu > Setting > Network. 2. Sel

78 C H A P T E R 9 5!I&)0-./0:&&

7 C H A P T E R 1 & ,-./0123.40-&

79 PTZ Menu PTZ menus can be navigated through with either the mouse or the front panel/remote. For quick access to certain PTZ settings, right clic

80 Figure 2. PTZ Settings Menu 2. Select channel where PTZ camera is installed next to Camera label. 3. Configure the settings of baud rate, d

81 4. Iris: Used to open up or close the iris of the PTZ. 5. Speed: Adjusts the movement speed of the PTZ. 6. Light: Turns PTZ light (if applicab

82 2. Select the Patrol button to enter the Patrol Management menu, shown in Figure 5. Figure 5. Patrol Management Menu 3. In the Patrol Mana

83 2. Click the Start button to call the patrol, and select the Stop button to stop the patrol, as shown in Figure 7. Figure 7. Patrol Managem

84 C H A P T E R 1 0 )7=6/7&A7-7<6 =6-.&

85 OSD Settings On Screen Display (OSD) settings can be configured in the Camera Management menu. The OSD is shown in each display during Live Previ

86 Figure 3. Display Settings Privacy Mask Settings You may setup privacy mask to mask off sensitive or private areas in the field of view

87 Figure2. Setting Mask Area 6. Select Exit to save settings and exit the Mask Area Settings interface.

88 C H A P T E R 1 1 M;;&A7-7<6=6-.&

8 Overview Developed on the basis of the latest technology, DS-8100-ST Series Digital Video Recorder combines the latest in advanced

89 Managing HDDs ,-4.47:4J4-<&M;;8&A newly installed hard disk drive (HDD) must be first initialized before it can be used with your DVR.

90 Figure 2. HDD Management Menu 2. Click Add to enter Network HDD menu. 3. Select type as NAS or IP SAN, shown in Figure 3 when selected as N

91 5. Select the network HDD to initialize. After initialization, the network HDD can be used. +6..4-<&M;;&F/0298&Your DVR can separ

92 Figure 6. Set Cameras for HDD Group 4. Select OK to save and exit menu. +6..4-<&M;;&+.7.28&You may change the behavior of

93 4. Set HDD Status to Read-Only. 5. Select OK to save and exit menu. Note: Once set to read-only, the HDD cannot be written to until it is set

94 Figure 8. Log Search Menu 4. Set Major Type to Information. 5. Set Minor Type to HDD SMART. 6. Enter Start Time and End Time. 7. Click th

95 Figure 10. HDD SMART Information User can also click Menu > HDD to enter the HDD management menu, as shown in Figure1, and then select the

96 Figure 12. Exception Menu 2. Select HDD Error under Exception Type. 3. Select trigger action. Trigger actions are further explained in

97 C H A P T E R 1 2 "!A&+6..4-<8&

98 Note: This section is valid for DS-8100AH (F) (L) I-ST ATM DVR. Network Interception The Network Interception is used for capturing the card No